Lighting Layer Planner — Plan 5–7 Light Sources
Planning layered lighting is much easier when you start with a count, not a catalogue. This planner works out how many light sources your room needs, splits them across ambient, task and accent layers, and suggests fittings for each layer so you can create a warm, flexible scheme.
Plan your room’s lighting layers
The 5–7 light rule, explained
Most rooms feel flat when they rely on a single ceiling light. The centre of the room is harsh, the corners sit in gloom, and there is no way to change the mood without switching the whole room off. The idea behind the 5–7 light rule is to spread light across layers so the room has depth, warmth and flexibility.
Five is the minimum because one source cannot do every job a room asks of it. You need general light to move around safely, focused light to read or work by, and a little decorative light to make the room feel finished. Seven is the upper limit: more can become cluttered and will only confuse you with choice. This planner adds more sources only when a room is large or has a special need, like extra task lighting in a kitchen. Fewer, well-placed fittings will always beat more poorly placed ones.
The three layers: ambient, task and accent
Ambient light is the general wash that lets you see the room and move around it safely. It usually comes from ceiling pendants, flush fittings or wall lights, and it should be soft and even rather than a single bright point. There is no single right way to provide it; a mix of fittings at different levels and heights often works best.
Task light is focused light placed close to where a job happens. A reading lamp beside an armchair, a desk lamp, an under-cabinet strip above a kitchen worktop and a mirror light in a bathroom are all task lights. They let you work, read or cook without straining your eyes, and they make the space feel more purposeful.
Accent light draws the eye to something worth looking at: a picture, a shelf of objects, a textured wall or a piece of architecture. Picture lights, small shelf lights and uplighters that wash a wall with a soft glow are all forms of accent lighting. It is not about brightness, but about highlighting a small area, adding depth and making a room feel considered.
Warm white, dimmers and placement
Warm white at 2700K is the colour temperature this planner uses for every layer, and there is a good reason for that. It gives a soft, golden glow that suits living rooms, bedrooms and dining rooms, and it flatters wooden furniture, soft fabric and most skin tones. Avoid mixing temperatures in one room, as differences of even a few hundred Kelvin can make identical bulbs look different.
A dimmer turns one fitting into several moods. Bright for cleaning, medium for everyday living and low for a quiet evening — the same pendant can serve all three if it can be dimmed. Fit dimmers on your ambient and accent lights; task lighting benefits from being easily adjustable too, and adding a dimmer is a helpful extra.
Placement matters as much as the fittings themselves. Wall lights work best around eye level or just above, so the light washes the wall without shining straight into your eyes. Avoid bare bulbs in your direct line of sight. Keep task lights close to the work and to the side, keep accent lights aimed at the object rather than across the room, and leave a little distance between a light and the wall it washes so the glow spreads evenly.
Frequently asked questions
Why five to seven light sources?
One light cannot provide general, focused and decorative light at the same time. Five to seven sources, spread across the three layers, let you light different jobs and moods without over-lighting the room.
What is the difference between ambient, task and accent light?
Ambient light is the general wash that lights the whole room. Task light is focused light for a job, such as reading, cooking or working. Accent light draws the eye to a feature: a picture, a shelf or a piece of architecture.
Why 2700K warm white?
2700K is a warm white with a soft golden tone that suits relaxed living spaces and flatters wood, fabric and skin tones. Keeping every bulb in the room at the same warm temperature stops your lighting from looking uneven.
Do I need a dimmer on every light?
No. Dimmers are most useful on ambient and accent lights, which set the mood of the room. Task lights are often fine on a simple switch, since you usually want them in their normal, work setting.
My room is open plan — how do I use the planner?
Measure each zone separately, such as the seating area and the dining area, and run the planner for each one. Open-plan spaces work best when you treat each area as its own room, so the right fittings can be placed for the job each zone does.
Related guides
- Warm Glow Lighting Ideas for Living Room & Bedroom That’ll Make Your Home Feel Cosy — simple ways to use warm light to make a room feel glowing and welcoming.
- Interior Ambient Lighting Ideas for Dimmers and Lamps — ideas for creating a soft, even wash of light that flatters the room.
- 12 Modern Hotel Bedroom Lighting Ideas — hotel-style lighting schemes you can copy at home.
- Custom Ambient Lighting Palette: Curate Your 5 Colour Schemes — build a lighting palette that works across your home.
- How to Make Your Bedroom Feel More Hotel-Like — simple ways to bring hotel comfort into your bedroom.
- All home decor tools — calculators and planners for every room.